Choose any of these login options:

Which Commands Determine the User Level on Huawei switch

Which Commands Determine the User Level on Huawei switch Huawei 9306 ,  the follwering will tell the details:
 
If the authentication mode of the user is non-authentication, the user level is specified by the user privilege command in VTY mode.
 
If the authentication mode of the user is local authentication, the user level can be set in the following ways that are in descending order of priorities:
1 Use the following command to set the local user level.
2 Use the local-user user-name privilege level level command.
3 In the service scheme view, use the following command to set the administrator user level in the domain.
4 Use the admin-user privilege level level command.
5 Use the user privilege command in VTY mode to set the user level.
 
...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Huawei switch | 6 Comments

How to Reset the Console Password on the Cisco Router

Question: I'm trying to require a password to be entered (i.e. cisco) when getting into the router and before even getting to the 'user exec mode' prompt.
It would seem that after I set the password 'cisco' and then run the command 'login' in order for the password to be required when getting into the router I shouldn't get the error '% Incomplete command.' and that's why when I currently console in to the router I go immediately to the 'user exec mode' prompt i.e. in my case:
r2
 
Router(config)#line console 0
Router(config-line)#password cisco
Router(config-line)#login
% Incomplete command.
 
The solution:
Added the lines:
aaa authentication login default local
aaa authorization exec default local
 
as described....
 
...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Cisco router | 9 Comments

How to Configure a VLAN on Huawei MA5612

Configuring VLAN is a prerequisite for configuring a service. Hence, before configuring a
service, make sure that the VLAN configuration based on planning is complete.
Prerequisite: The ID of the planned VLAN is not occupied.
 
The Huawei MA5612 configuration overview:
Step 1 Create a VLAN.
Run the vlan command to create a VLAN. VLANs of different types are applicable to different scenarios.
 
NOTE
1To add VLANs with consecutive IDs in batches, run the vlan vlanid to end-vlanid command.
2 To add VLANs with inconsecutive IDs in batches, run the vlan vlan-list command.
 
Step 2 (Optional) Configure the VLAN attribute.
The default attribute for a new VLAN is "common". You can run the vlan attrib command to
configure the attribute of the VLAN.
Configure the attribute according to VLAN planning.
 
NOTE
...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Uncategorized | 5 Comments

Huawei S9300 Switch New Software Version V100R002SPH031

On Oct 10th 2013, Huawei releases its S9300 switch latest software version V100R002SPH031, Huawei S9300 switch customers with older software version like V100R003SPH021, V200R003SPH002, V200R001SPH011are encouraged to upgrade to the latest software.
The SPs of the S9300 are released based on the R version and each version is compatible with the earlier versions. You only need to install the latest SP, without considering about the version of the SP that is running currently (except for informal patches and emergency patches).
 
If you already have Huawei S9300 Switches, and you want to upgrade to the newer software version or download related documents, you may contact your previous Huawei switch supplier or Huanetwork.com, Huanetwork Email: sales@huanetwork.com, for customers already purchased Huawei S9300 from...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Uncategorized | 1 Comment

What Commands Does Huawei OLT Have for Querying the Version

Question: What commands does huawei OLT have for querying the version?
 
Answer: 1. When running the display patch all command, you can query the current version of the system and the information about the running patch.
2. When running the display language command, you can query the version that is running in the system, namely, the version of the active control board.
3. When running the display version frameid/slotid command, you can query the C-level version and the board hardware version of the control boards.
...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Uncategorized | 5 Comments

Huawei Provide NE5000E Core Router for Spain Jazztel

On December 3rd, according to foreign media reports, Huawei said has won a contract service provider Jazztel from Telefonica, will provide its NE5000E 400G core router which is a nationwide network in Spain . Jazztel: Huawei NE5000E the first Western European customers.
 
Huawei said that with FTTH warming , Jazztel are to enhance the capacity of its backbone network to meet new demands from multimedia data traffic and data services .
 
" Booming mobile broadband and video services , is driving growth in the backbone network data traffic and 400G technology is still in its experimental status and opportunities into actual commercial network now ." Huawei's IP product line president operators Gai Gang said .
 
...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Huawei access | 3 Comments

How to solve: NMS Fails to Manage a Device on Huawei MA5600T

This topic describes how to troubleshoot the fault when the NMS fails to manage the MA5600T/MA5603T.

 

The steps:

Step 1 Check whether the same NMS fails to manage other devices, that is, whether the fault occurs in a large scale.

A If the same NMS fails to manage other devices, proceed to Step 2.

B If the same NMS can manage other devices, go to Step 4.

Step 2 Check whether the NMS version matches the host version.

A If the NMS version matches the host version, go to Step 4.

B If the NMS version does not match the host version, use a matched NMS version. Then,

proceed to Step 3.

Step 3 Check whether the fault is rectified.

A If the fault is rectified, go to Step 12.

B If the fault persists, proceed to Step 4.

Step 4...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Uncategorized | 1 Comment
lookafterpp
Reputation: 0 (0%)
Member Since:  Jul 2013
Last activity: 5/13/15, 6:05 pm