Choose any of these login options:

How to configure Huawei MA5600?

How to configure Huawei MA5600, here are the tips and configuration sample.

  • Quantity of the main control board SCUB, one or two
 
  • Choose the uplink pinch board, O4GS(4GE Optical), O2GS(2GE Optical) and E4GFA (4 GE/FE Electrical) are commonly used;
 
  • Calculate how many ADSL2+ or VDSL2 subscribers to be connected, Huanetwork most stock are 64-port ADSL2+ over POTS(with 600ohm Splitter) board ADEE;
 
  • The cable length
 
  • Accessory, SFP module, patch cord.
MA5600 Configuration Sample
MA5600 MA5600 Chassis 1
1*SCUB Main Control Board
1*O2GS Pinch Board, 2*GE Optical
ADEE Service Board, 64-port ADSL2+ over POTS(with 600ohm Splitter) 8
Service Board Subscriber Cable, 128 Core, 20M 8
...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in MA5600T | 2 Comments

How to Configure IPv6 Services in the FTTB+HGW Scenario

This section describes the methods for configuring IPv6 services in the FTTB+HGW scenario. Works for Huawei MA5683T, Huawei MA5680T, Huawei MA5608T, Huawei MA5603T...

 

Application Scenario

The FTTB+HGW networking includes two scenarios: The ONU provides the voice service in one scenario and the HGW provides the voice service in another scenario. After IPv6 is introduced to the network, the voice service still uses IPv4 so that these two voice scenarios do not change after IPv6 introduction.
 

FTTB+HGW Application Scenario

Figure 1 shows an FTTB+HGW network. The Huawei OLT ...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in MA5600T | 1 Comment

Huawei MA5600 Series Boards Description

The Huawei MA5600 supports the super control unit (SCU) board, service interface boards, and SPL boards. Each type of board is different in function.
The boards of the MA5600 include the control boards, service boards, and other boards. Table 1Table 2 and Table 3 list the boards of the MA5600 respectively.
 
NOTE:
The boards decorated with * are not supported by the Huawei MA5608T
 
Table 1 Service boards of the MA5600

 
Table 2 Control boards of the MA5600
 

 
Table 3 SPL boards of the MA5600

 

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in MA5600T | 3 Comments

The three types of N66 cabinet for Huawei MA5600

Huawei MA5600 is a front access cabinet. According to the height, the cabinet can be divided into two types:

  • H66-18
  • N66-22
  • N66E-18
Table 1 Dimensions and weight of the N66 cabinet
Cabinet Dimensions (W x D x H) Weight (Empty Cabinet) Maximum input current Working voltage range
N66-22 600 mm x 600 mm x 2200 mm 73 kg
  • DC power supply: 100 A
  • AC power supply: 30 A
  • DC power supply: -48 V DC to -60 V DC
  • AC power supply: 200 V AC to 240 V AC
H66-18 600 mm x 600 mm x 1800 mm 81 kg
  • DC power supply: 50 A
  • AC power supply: 20 A

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in MA5600T | Comment on this

Alarm Analysis for Huawei MA5600 Series

When the Huawei MA5600T/MA5603T have the trouble, have you remember to analysis the alarms?
 
In facts, by analyzing alarms, causes of certain faults can be found, or a fault can be located by using alarm analysis together with other methods.
 
An alarm is an important prompt when a fault or an event occurs. When a fault occurs on the MA5600T/MA5603T, an alarm may be generated. Through the alarm management system, such as the NMS or the CLI, you can query alarms.
 
The alarm information includes the detailed description and the possible cause of a fault or an abnormality, and the troubleshooting advice. The alarm information involves aspects such as the hardware, link, service, and CPU usage. The information volume of the alarm information is large and complete, which is the important basis for fault analysis and location.
 
...  Read More

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in MA5600T | 4 Comments
lookafterpp
Reputation: 0 (0%)
Member Since:  Jul 2013
Last activity: 5/13/15, 6:05 pm