Choose any of these login options:

How to Configure VLAN ID-based QinQ Stacking on Huawei Router

How to Configure VLAN ID-based QinQ Stacking on Huawei Router
QinQ mitigates VLAN ID shortage and is widely applied when users connect to carrier networks.
When private networks connect to a carrier network through CEs and PEs, run the qinq
stacking command on CE interfaces connected to PEs so that the CE interfaces add the outer VLAN tag allocated by the carrier to user packets. This implementation saves VLAN IDs and allows user packets to be transparently transmitted on the carrier network.
The configuration overview:
Step 1 Run:
The system view is displayed.
Step 2 Run:
bridge bridge-id
A bridge group is created and the bridge group view is displayed.
Step 3 Run:
Exit from the bridge group view.
Step 4 Run:
interface { ethernet | gigabitethernet }.subinterface-number
The Ethernet sub-interface view is displayed.
Sub-interfaces can only be created on Layer 3 Ethernet interfaces. If an interface works in Layer 2 mode and supports switching between Layer 2 and Layer 3 modes, run the undo portswitch command to switch the interface in Layer 3 mode before creating a sub-interface on the interface.
Step 5 Run:
bridge bridge-id
The Ethernet sub-interface is added to the bridge group.
Step 6 Run:
bridge vlan-transmit enable
The interface is enabled to transparently transmit VLAN IDs.
Step 7 Run:
qinq stacking vid low-ce-vid [ to high-ce-vid ] pe-vid pe-vid [ remark-8021p 8021pvalue2]
VLAN ID-based QinQ stacking is configured.

Customers interested in purchasing Huawei router or the price, please refer to below links:
Huawei AR2240

share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Huawei router | 2 Comments
Reader Comments  (2)

no photo
sinha | August 20th 2017 at 1503295517

I am looking for the free psn code generator which could help me in finding playstation card codes.

Post a Comment
Reputation: 0 (0%)
Member Since:  Jul 2013
Last activity: 5/13/15, 6:05 pm