Choose any of these login options:

Configuring the Upstream Port on Huawei MA5612

Configuring the Upstream Port on Huawei MA5612
This topic describes how to add the upstream port to a certain VLAN so that the user packets carrying the VLAN ID can be transmitted to the upper-layer device through the Huawei OLT upstream port.
 
Procedure
Step 1 Add the upstream port to the VLAN.
Run the port vlan command to add the upstream port to the VLAN.
 
Step 2 (Optioal) Configure the attributes of the upstream port.
If the default attributes of the upstream port fail to meet the requirement for interconnecting the upstream port with the upper-layer device, you need to configure the attributes of the upstream port. For detailed procedure, see 3.3 Configuring the Attributes of the Upstream Port.
----End
 
Example
To add upstream port 0/0/0 to VLAN 100, do as follows:
huawei(config)#port vlan
{ vlan-list|vlanid<1,4093> }:100
{ frame/slot|to }:0/0
{ portlist }:0
Command:
port vlan 100 0/0 0



share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in MA5612 | Comment on this
Reader Comments

Post a Comment
Author:
Email:
(Optional)
  
lookafterpp
Reputation: 0 (0%)
Member Since:  Jul 2013
Last activity: 5/13/15, 6:05 pm