Choose any of these login options:

Configuring Alarm Management for Huawei router (2)

Huawei AR150 (AR 151)&200& AR1200 &2200&3200 Series Enterprise
Routers Configuration Guide - Configuring Alarm Management for Huawei router

3 Configuring Alarm Correlation Suppression
Context
Before configuring alarm correlation suppression, enable alarm correlation analysis to analyze alarm types including root-cause and non-root-cause. For a non-root-cause alarm, the system marks the sequence number of its root-cause alarm on the non-root-cause alarm. After alarm correlation suppression is configured, the system filters out non-root-cause alarms and reports only root-cause alarms to the NMS.
 
Procedure
Step 1 Run:
system-view
The system view is displayed.
 
Step 2 Run:
alarm
The alarm view is displayed.
 
Step 3 Run:
correlation-analyze enable
Alarm correlation analysis is enabled.
By default, alarm correlation analysis is disabled.
 
Step 4 Run the following commands to configure NMS-based or interface-based alarm correlation suppression.
 
NOTE
You can configure one or both of NMS-based and interface-based alarm correlation suppression functions.
l Configuring NMS-based alarm correlation suppression
1. Run:
quit
The system view is displayed.
2. Run:
alarm correlation-suppress enable target-host ip-address securityname
securityname [ vpn-instance vpn-instance-name ]
Alarm correlation suppression based on the NMS IPv4 address is enabled.
3. Run:
alarm correlation-suppress enable target-host ipv6 ipv6-address
securityname securityname
Alarm correlation suppression based on the NMS IPv6 address is enabled.
By default, NMS-based alarm correlation suppression is enabled.
l Configuring interface-based alarm correlation suppression
Run:
mask interface interface-type interface-number
Interface-based alarm correlation suppression is enabled.
By default, interface-based alarm correlation suppression is disabled.
NOTE
After interface-based alarm correlation suppression is configured, root-cause and non-root-cause
LinkDown alarms generated on the interface are not reported to the NMS.
----End
 
4 Checking the Configuration
Context
l Run the display alarm information [ name alarm-name ] command to view the specified alarm configuration.
l Run the display this command in the alarm view to view the alarm configuration.

The huawei router configuration, more topic:


 



share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Huawei router | 5 Comments
Reader Comments  (5)

no photo
Suhana Khan   | March 29th 2017 at 1490854297

Delighted so much to be here and to read this much interesting stuff. Thanks a lot for this information.
Beautiful Escorts in Delhi
no photo
Suhana Khan   | March 29th 2017 at 1490854306

Delighted so much to be here and to read this much interesting stuff. Thanks a lot for this information.

Beautiful Escorts in Delhi
no photo
Seymour Bettis   | May 16th 2017 at 1494989930

no photo
saniya   | August 10th 2017 at 1502372432

I would like to share this interesting article thank you so much.
Escorts service in delhi
no photo
shilpa   | August 19th 2017 at 1503126480

Thanks for spending a lot effort in sharing this specific information. Nice article, nice sharing this information.
saket escorts service
Escorts in saket
Call Girls in saket
VIP agency Escorts

Post a Comment
Author:
Email:
(Optional)
  
lookafterpp
Reputation: 0 (0%)
Member Since:  Jul 2013
Last activity: 5/13/15, 6:05 pm