Choose any of these login options:

Configuring Alarm Management for Huawei router (1)

Alarm management includes setting alarm severities, alarm correlation suppression, and enabling alarm reporting delay, also works for the 12 port router.
 
Pre-configuration Tasks
Before configuring alarm management, complete the following task:
Powering on the device and ensuring a successful self-check
 
1 Setting the Alarm Severity
Context
The system defines default alarm severity for each alarm. Users can change the alarm severity.
When receiving alarms reported by a device, the NMS can configure filtering rules to display only alarms of a specified severity.
As defined in X.733, alarms are classified into six severities.

Procedure
Step 1 Run:
system-view
The system view is displayed.
 
Step 2 Run:
alarm
The alarm view is displayed.
 
Step 3 (Optional) Run:
display alarm information [ name alarm-name ]
The alarm severity is displayed.
 
Step 4 Run:
alarm-name alarm-name severity severity
The alarm severity is changed.
The system has defined default alarm severity for each alarm.
----End
 
2 Configuring the Alarm Reporting Delay Function
Context
When an alarm is reported repeatedly, users cannot locate faults in an efficient manner. After the alarm reporting delay function is enabled and the delay is configured, a large number of invalid alarms are prevented from being reported.
 
After the alarm reporting delay function is enabled,
l If no clear alarm is generated during the period, the alarm is reported to the NMS when the period expires.
l If a clear alarm is generated during this period, the alarm and its clear alarm are both deleted from the alarm queue and will not be reported to the NMS.
 
Procedure
Step 1 Run:
system-view
The system view is displayed.
 
Step 2 Run:
alarm
The alarm view is displayed.
 
Step 3 Run:
delay-suppression enable
The alarm reporting delay function is enabled.
By default, the alarm reporting delay function is enabled.
 
Step 4 (Optional) Run:
display alarm information [ name alarm-name ]
The delay in reporting alarms is displayed.
 
Step 5 (Optional) Run:
suppression alarm-name alarm-name cause-period cause-seconds
The delay in reporting alarms is configured.
The system defines a default delay in reporting alarms.
----End

More information about the Huawei router, please visit: 

http://huaweirouter.blog.com



share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Huawei router | 1 Comment
Reader Comments  (1)

no photo
jingboo | November 4th 2017 at 1509785880

Beckham portant cette seule aiguille Tudor Golden hache est le nom de la Black Bay S & G, S que l'acier inoxydable, G a dit l'or. Nous pouvons voir que Tudor n'a pas utilisé la convention de nommage traditionnelle de Rolex sur cette replique montre . Au lieu de cela, il a appelé le rôle de l'orfèvre, mais S & G. De ce point, vous pouvez voir Tudor et Rolex "se séparer" pour former une différence. Juste de l'apparence, nous pouvons voir que cette montre en acier inoxydable, l'utilisation de l'or K et aucune différence entre les Glitches Rolex (aiguille Tudor or 41 mm, Rolex eau fantôme 40 mm). La lunette, la couronne, le milieu du bracelet, sont dorés. Cependant, nous devons être conscients que Tudor est différent de replique montre suisse dans la gestion des détails. Montre en or de Rolex, la section du milieu du bracelet sont en or poli K, les deux côtés du dessin, et Tudor or bracelet d'aiguille de hache si la position de l'or ou de l'acier sont dessin. Ce traitement peut faire la différence avec Rolex, et (peut-être) contribue à réduire le prix (on peut voir que le milieu du bracelet de la montre Rolex en acier à haut prix est poli pour augmenter le sentiment de luxe)

Post a Comment
Author:
Email:
(Optional)
  
lookafterpp
Reputation: 0 (0%)
Member Since:  Jul 2013
Last activity: 5/13/15, 6:05 pm