Choose any of these login options:

Configuration of the H3C fiber router

Along with the popularization of JC104A price broadband optical fiber, more and more providers use fiber at home, want to use optical fiber must use optical routers, many people still do not understand the optical router settings. Here is the configuration of the H3C fiber router
A, connection mode
Fiber -- photoelectric converter -- proxy server -- computer.
1, ADSL/VDSLPPPoE: running third dial-up software such as Enternet300or WinXP system built-in dial-up program on the computer, enter the ISPaccount and password, every time before the Internet to dial.
2, to enable the routing function, enter the ISP account and password, the dial action to the MODEM to do.
3, static IP:ISP to provide you with a fixed IP address, subnet mask, default gateway, DNS.
4, the dynamic IP properties: TCP/IP computer is set to "obtain an IP address automatically", each time you start the computer to the internet.
5, 802.1X+ static IP:ISP provides a fixed IP address, private dial-upsoftware, account and password.
6, 802.1X+ dynamic IP:ISP provides dedicated dial-up software, account and password.
In 7, WEB certification: every time before the Internet, open the IE browser,will automatically jump to the specified ISP page, enter the ISP username and password, the authentication before it can make other surf the netoperation.
Two, the basic setting
1, a physical connection, there is not much, very much the same, thecomputer's IP address and router management address set in the same network segment, enter the IP address management in the IE field, the user login prompt input broadband router specification of default managementaccount and password to enter the settings interface.
2, in order to make the router can automatically dial, we also need to fill in the router ADSL account, click on the top of the page tab, and then click WAN, see the setup ADSL account in PPPoverEthernet, enter your ADSLaccount number and password settings, network state is in to the systemstate information office to see, in the WAN terminal can clearly see theADSL dial-up access network information.
3, setting up the ADSL account, we can access the Internet throughbroadband router, then we can open the DHCP function, the IP address range is set in the DHCP server can enter the IP range, after saving fiber router settings with automatic IP address allocation function.
These connection authentication only popularity rate some broadband access is relatively high,and if you still don't understand, can ask ISP business consulting, set up their own optical router.
 Along with the popularization of broadband optical fiber, more and more providers use fiber at home, want to use optical fiber must use optical routers, many people still do not understand the optical router settings. Here is the configuration of the H3C fiber router
A, connection mode
Fiber -- photoelectric converter -- proxy server -- computer.
1, ADSL/VDSLPPPoE: running third dial-up software such as Enternet300or WinXP system built-in dial-up program on the computer, enter the ISPaccount and password, every time before the Internet to dial.
2, to enable the routing function, enter the ISP account and password, the dial action to the MODEM to do.
3, static IP:ISP to provide you with a fixed IP address, subnet mask, default gateway, DNS.
4, the dynamic IP properties: TCP/IP computer is set to "obtain an IP address automatically", each time you start the computer to the internet.
5, 802.1X+ static IP:ISP provides a fixed IP address, private dial-upsoftware, account and password.
6, 802.1X+ dynamic IP:ISP provides dedicated dial-up software, account and password.
In 7, WEB certification: every time before the Internet, open the IE browser,will automatically jump to the specified ISP page, enter the ISP username and password, the authentication before it can make other surf the netoperation.
Two, the basic setting
1, a physical connection, there is not much, very much the same, thecomputer's IP address and router management address set in the same network segment, enter the IP address management in the IE field, the user login prompt input broadband router specification of default managementaccount and password to enter the settings interface.
2, in order to make the router can automatically dial, we also need to fill in the router ADSL account, click on the top of the page tab, and then click WAN, see the setup ADSL account in PPPoverEthernet, enter your ADSLaccount number and password settings, network state is in to the systemstate information office to see, in the WAN terminal can clearly see theADSL dial-up access network information.
3, setting up the ADSL account, we can access the Internet throughbroadband router, then we can open the DHCP function, the IP address range is set in the DHCP server can enter the IP range, after saving fiber router settings with automatic IP address allocation function.
These connection authentication only popularity rate some broadband access is relatively high,and if you still don't understand, HP JC105A can ask ISP business consulting, set up their own optical router.
More information about switch and router, please view :http://doing29.exteen.com/
 



share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  lookafterpp in Uncategorized | Comment on this
Reader Comments

Post a Comment
Author:
Email:
(Optional)
  
lookafterpp
Reputation: 0 (0%)
Member Since:  Jul 2013
Last activity: 5/13/15, 6:05 pm