Choose any of these login options:

Ford-VCM OBD Diagnostic High Quality

BMW ICOM ISTA A+B+C Firmware Only - Car Diagnostic Tool Supplier

With the growing maturity of automotive technology, speaking of the initiative to change. We should not unfamiliar, but the principle of their work is clear, here I am for you a rough introduction one or two Active steering is developed by BMW independent research and development due to the high cost, mainly loaded in the BMW intermediate car, such as the 5 Series 7 series X and GT The working principle of active steering is battery valve "variable differential motor controlled by ECU, to complete the transmission and planetary gear ratio, thereby changing the steering angle of output, generally speaking is when the vehicle in the steering wheel, from the left to the right end of a total of 2 times in the direction (to reduce the driver's actions. Rotate the tires, and thus a more efficient operation of mobile vehicle location easier) When the vehicle is running, the vehicle speed rises, the steering wheel from left to right, the total number of about 4 laps (the purpose is to adjust the angle of the tire more subtle angle, in order to complete a slight movement) .

and you can use the Ford-VCM OBD Diagnostic Interface High Quality

Ford-VCM OBD Diagnostic Interface is professional device for ford vehicles, Ford-VCM OBD has the most functions of ford vcm ids, it is the mini version of ford vcm ids. Ford-VCM OBD works on ford car by OBD2 port directly.It is designed for ford, mazda and other few brand cars, really working very well with those cars 1996-2010, some 2011 cars.

Ford-VCM OBD is diagnostic programmer for Ford vehicles 1996-2010. It can connect to various electronic control units (ECUs) and display identification, read and clear fault code memory, display and record measured values and perform actuator tests, some key programmer, etc.

Key features:

1.Support for wide range of ECUs and models
2.Easy connection via smart USB to OBD2 interface
3.Wide range of communication protocols and buses covered: 4.J1850 PWM, ISO, CAN
5.Automatic ECU recognition
6.Automatic vehicle scan
7.ECU Identification
8.Fault code (DTC) reading
9.Fault code clearing
10.Measured vaules / live data
11.Live data recording
12.Diagnostic protocol printing
13.Actuator tests
14.Control unit coding
15.PATS Immobilizer operations
16.Flash and serial memory programming

You can go to the GO2OBD.NET buy FORD VCM.



share on: Share it! Tweet it! Stumble it! Digg it! Email it!  |  Permalink  |  go2obd in Uncategorized | Comment on this
Reader Comments

Post a Comment
Author:
Email:
(Optional)
  
go2obd
Reputation: 0 (0%)
Member Since:  Dec 2015
Last activity: 11/27/16, 8:26 pm